MSA – GM Products
(Only Venezuela)
Fire Detection
GENERAL MONITORS ® FL500 UV/IR
FLAME DETECTOR
The FL500 UVIR Flame Detector delivers high speed flame detection with increased false alarm immunity in a compact design. The FL500 UV/IR Flame Detector monitors for radiation emitted by a flame in both the ultraviolet (UV) and infrared (IR) spectral ranges. This UV/IR combination provides a fast response time and increased false alarm immunity against sources of radiation for reliable protection.
GENERAL MONITORS ® FL4000H
MULTI-SPECTRUM IR FLAME DETECTOR
The FL4000H is an advanced multi-spectrum infrared (MSIR) flame detector that provides superior false alarm immunity with the widest field of view. The FL4000H employs a multi-spectral optical IR sensing array with a sophisticated Neural Network Technology (NNT) system to reliably discriminate between actual flames and the vast majority of false alarm sources. The FL4000H detects typical fires such as alcohol, n-heptane, gasoline, jet fuels and hydrocarbons. It can also see through dense smoke produced by diesel, rubber, plastics and lube oil fires.
GENERAL MONITORS ® FL500-H2 UV/IR
FLAME DETECTOR
FOR HYDROGEN APPLICATIONS
Ultraviolet / Infrared Flame Detector with false alarm immunity.
The FL500-H2 is an Ultraviolet / Infrared flame detector designed specifically to detect hydrogen (H2) fires. The FL500-H2 optical flame detector monitors for radiation emitted by a hydrogen flame in both the ultraviolet (UV) and infrared (IR) spectral ranges. This UV/IR combination provides a fast response time and increased false alarm immunity against sources of radiation for reliable protection.
GENERAL MONITORS ® TL105
Test Lamp
The TL105 is a battery-operated, explosion-proof test lamp designed specifically to test all General Monitors Flame Detectors including (but not limited to) the FL500, FL4000H, and any of the FL3100 Series detectors. The TL105 operates up to 35 feet from the flame detector.
Gas Detection (Fixed)
GENERAL MONITORS® S5000
GAS DETECTOR
It operates over a wide temperature range using a variety of gas sensing technologies. Breakthrough XCell® gas sensors with TruCal® technology extends calibration cycles up to 24 months and actively monitors sensor integrity for ultimate peace of mind.
ULTIMA® X5000
GAS DETECTOR
Recalibrate Your Expectations.
The ULTIMA® X5000 Gas Monitor is the future of gas detection for oxygen, toxic and combustible gases. MSA XCell® gas sensors with TruCal® technology offer calibration cycles up to 24 months (local calibration respected). The gas transmitter’s advanced, multi-lingual OLED display is easy to read and the unique touch-screen interface makes it simple to navigate.
MSA® TG5000
GAS DETECTOR
Ideal for Wastewater, Commercial and Light Industrial Applications The TG5000 Gas Monitor is an effective and economical solution for detecting combustible and toxic gases, as well as oxygen deficiency/enrichment, in wastewater, commercial and light industrial applications.
GENERAL MONITORS® IR400
POINT IR GAS DETECTOR
The IR400 Infrared (IR) Point Detector is a hydrocarbon gas detector that continuously monitors combustible gases and vapors within the lower explosive limit (LEL) and provides alarm indication. It features an industry-leading response time of less than 3 seconds, even with a splash guard installed. All electronics are contained within an explosion-proof housing so that the IR400’s detector information can be processed locally. Configurations with analog output, Modbus and HART are also available.
GENERAL MONITORS® IR5500
OPEN PATH INFRARED GAS DETECTOR
The IR5500 is an open path infrared (IR) gas detector that continuously monitors for flammable gas leaks over large open areas. It monitors in both the LEL-m and ppm-m ranges to detect both small and large leaks. The IR5500 offers the benefits of early detection with its high sensitivity to gas concentrations at the ppm levels. This feature allows it to alarm faster than an LEL-only detector. Digital display and adjustable mounting arms ensure easy alignment. Factory calibrated for low-maintenance operation.
GENERAL MONITORS® OBSERVER®-I
ULTRASONIC GAS LEAK DETECTOR
Instantly detect pressurized gas leaks with this high-precision, omni-direction acoustic detector utilizing Gassonic® ultrasonic technology. Works even when traditional methods of gas detection are unsuitable or dependent on ventilation. The Observer-i UGLD provides an industry-leading detection range (up to 28 m) reducing the number of detectors required.
SENSCIENT ELDS™
OPEN PATH GAS DETECTOR
The Senscient ELDS laser-based open path gas detector is available for a wide range of toxic and flammable gases. The Senscient ELDS uses ‘SimuGas’ self-testing to eliminate employees entering hazardous areas for gas checks. Nuisance false alarms are virtually eliminated with its breakthrough Harmonic Fingerprint processing.
ULTIMA® X SERIES GAS MONITORS
WITH X3® TECHNOLOGY
Designed to provide thorough, continuous monitoring of many hazardous gases, the indoor/outdoor Ultima X Series Gas Monitors offer excellent performance and MSA quality craftsmanship. DuraSource™ Technology offers extended sensor life, while HART provides convenient setup, calibration and diagnostics. HART also allows for existing component install and wiring to be used. A single circuit board increases reliability, while our patented sensor disconnect-underpower feature allows all sensors to be replaced in hazardous areas without area declassification.
Gas Detection (Portable)
ALTAIR® 4XR
MULTIGAS DETECTOR
The ALTAIR® 4XR multigas detector is the most robust equipment developed by MSA, exceeding industrial standards in numerous fundamental areas and being the only one on the market that complies with the military standard MIL-STD-810G. Outfitted with rapid-response MSA XCell® sensors, the ALTAIR 4XR Gas Detector is the toughest 4-gas monitor on the market and is backed by a 4-year warranty.
ALTAIR® 5X
MULTIGAS DETECTOR
The ALTAIR 5X Gas Detector is capable of measuring up to 6 gases simultaneously and is now available with integrated PID sensor for VOC detection. Driven by advanced MSA XCell® Sensor Technology, the ALTAIR 5X Gas Detector delivers faster response time, better stability, accuracy, longer service life, and cost savings over the life of the instrument.
ALTAIR® 4X MINING
MULTIGAS DETECTOR
MSA’s new ALTAIR 4X MSHA Multigas Detector is powered by XCell sensor technology, built using MSA’s patented application-specific integrated circuit (ASIC) design. They provide durability and performance for mining applications. Optimized methane catalytic sensor that provides greater stability over time. The ALTAIR 4X MSHA Multigas Detector for LEL Lower Explosive Limit, Oxygen (O2), Carbon Monoxide (CO), Oxygen (O2) and Nitrogen Dioxide (NO2) is resistant and functional for Mining applications.
ALTAIR IO™ 4
GAS DETECTION WEARABLE
The ALTAIR io 4 is a secure, smart gas detector with out-of-the-box connectivity packed into an ultra-rugged design – featuring our XCell sensor platform which continues to lead the industry in lifetime & durability. The ALTAIR io 4 was designed from the ground-up to work seamlessly with the MSA Grid and the ALTAIR io Dock, providing hassle-free compliance, effortless fleet management & incredible visibility into your worker safety that you’ve never had before.
Controllers
HazardWatch Fire and
Gas System
Fire and Gas Detection System. An innovative, modular system that combines highly reliable programmable logic controller (PLC) technology with our advanced gas and flame field devices. It is highly scalable, making it suitable for small systems to large plant-wide applications. Offering intelligence, flexibility and reliability, the HazardWatch System’s controller hardware configuration and software has been tested by Factory Mutual to verify NFPA 72 compliance.
HazardWatch FX-12
Fire and Gas Detection System
State of the Art Fire and Gas Protection.
The HazardWatch FX-12 Fire and Gas Detection System represents the next generation in highly-intelligent monitoring solutions designed to help customers reduce hazard vulnerability and meet the world’s most demanding safety standards. Offering intelligence, flexibility, and reliability, the system’s controller hardware configuration and software have been tested by FM to verify NFPA 72 compliance
SUPREMA
Touch Controller
Fire and Gas Detection System for diverse range of industries and applications. The SUPREMATouch features a large colour touchscreen display with a title-based menu structure to optimize intuitive operation. It can be used with a wide range of detectors for combustible gas, toxic gas and oxygen deficiency. Output options include relays and 4-20 mA outputs.
Remote racks can be connected (satellite structure), which expands control systems and reduces cabling costs. Interfacing to external systems is provided by using Modbus or Profibus. It offers the option to create detailed and clearly laid out reports to support documentation and supports all the features of the SUPREMATouch.
Note: This is a custom product. Please consult your local MSA distributor or contact MSA Customer Service for configuration details.
Monitors
GasGard® XL
Controller
Monitor up to eight remote gas sensors with the highly accurate wall-mounted GasGard XL Controller. The controller’s large, multi-language LCD display provides real-time readings, offers full-system diagnosis and shows intuitive icons. Housed in durable, fire-retardant ABS plastic, the controller is suitable for a variety of chemical, industrial and waste water environments. The sensor also features a buzzer that sounds up to 85 dB.
9010/9020 LCD
Advanced design and innovative features make the 9010 and 9020 Controllers the top choice for gas-warning systems, monitoring up to 20 channels. The 9010 Controller operates with one independent sensor, while the 9020 operates with two independent sensors per control module. Each module comes with an independent AC/DC power supply for increased system reliability. Both units feature full internal diagnostics, which minimize false alarms and unexpected down time. The controllers can also power remote sensors, while the large four-digit LCD and LED provide such crucial information as gas concentration, alarm status and more. A convenient RS-485 serial interface offers handy printer connection to make a record of data, while a customized transmission protocol Modbus RTU can record serial bus data transmission such as system configuration, gas concentration, alarm and failure events. The LCD version has approvals for FM (North America) and CCCF (China) whereas the newest 9010/9020 SIL controller is ATEX and SIL 2 certified.
ModCon 75
Touch Controller
Designed for use with the Ultima® X Gas Monitor with X3 technology, the pre-programmed ModCon™ 75 Touch Controller features a 7” touchscreen monitor for ease of use. The controller is self-configuring for monitoring up to 25 monitors for a total of 75 sensors. The compact unit allows for remote control of many sensor/transmitter features. The controller is suitable for all industrial, municipal, oil, gas, petrochemical, and HVAC applications.
Quad Gas® II
Controller
Housed in a rugged, NEMA 4X enclosure, this microprocessor-based system links with up to four remote gas sensors. The large, four-digit LED display shows gas concentration and features four warning relays with one per sensor. The model also comes with four discrete alarm relays. Warning, alarm set-points and full-scale range of the sensor are set at the user-friendly keyboard, while a DC battery connection provides backup stability.
